Simex SWP-99, Руководство пользователя

Страница: 45 / 56

User manual for Digital Indicator and cooperating software
II. USER MANUAL FOR “ S-TOOLKIT ”
designed for
Windows
System requirements:
At least i486 computer,
Windows® 95/98/ME/2000/XP
Colour monitor with minimum resolution of 640 x 480,
1 MB of free hard drive space.
1. GENERAL CHARACTERISTICS
The S-Toolkit software enables configuration reading and writing operations, updating
the device firmware and obtaining basic information on SWP-99 -type devices through RS485
serial interface. This application enables to quickly and easily define device parameters in one
of three possible configuration models. The set of parameters can be transmitted directly to
the device or stored in a file for future use.
2. INSTALLATION AND STARTUP
The S-Toolkit-v(NR)-install file is designed to install the program ( NR is a version
number). The install file is locate in S-Toolkit folder on CD delivered with device. During
installation follow the directions provided by Installation wizard . The wizard will create a folder
called S-Toolkit on the computer’s hard drive, program files will be placed in this folder. The
shortcut to the program will be placed in a location specified by the user.
Manual startup of the program is done using the SToolkit.exe executable file. Directly
after startup the program will attempt to establish communication with the device in order to
read the current setup. The attempt to establish communications is executed using default
(during initial program startup) settings of RS 485 port options (baud rate 9600 b/s, address 0,
port: COM2) or setting defined by the user during previous launch of the program. If these
settings are different than the default, or those recently used, the program will signal the
communications error. After setting correct values in the
Interface options tab, read the
current configuration in
RS485 port settings
section using the
[Read from device]
button.
45