manualshive.com logo in svg

SILENT KNIGHT INTELLIKNIGHT 5820XL, Руководство по установке

Поделиться
Скачать
SILENT KNIGHT INTELLIKNIGHT 5820XL Скачать руководство пользователя страница 92

IntelliKnight 5820XL Installation Manual

6-10

151137

6.3

SK Analog Fire System Editor 5590

There are two ways to program the control panel. One way is to program directly from an 
annunciator, either the on-board annunciator or a Model 5860 Remote Annunciator. 
Annunciator programming is explained in Section 6.4.

The other method for programming is through the SK Analog Fire System Editor 5590. The 
5590 is an optional software package that allows you to easily program the control panel using 
a Windows-based computer and a *modem (not sold by Silent Knight). The software works in 
the following way. First you use the software to program options for the panel, saving the 
options in a file. You can then download the file to the panel. The software includes an on-line 
help system and a manual. See the manual (P/N 151004) for more information.

*

See Section 1.3 for a list of modems that have been tested for compatibility with the control panel and the SK 
Analog Fire System Editor 5590.

6.4

Annunciator Programming

There are two ways to program a control panel. One way is through the SK Analog Fire 
System Editor 5590 (see Section 6.3). 

The other method is to program directly from an annunciator, using either the on-board 
annunciator or a Model 5860 Remote Annunciator.

The following subsections describe programming basics, including a description of editing 
keys available for programming and how to move through programming menus. Section 7 
contain specific information about individual programming options.

Содержание INTELLIKNIGHT 5820XL







































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды