Siko MSAC501, Дополнение к первоначальной инструкции по установке

Страница: 32 / 36

MSAC501-S(RS485)
Service mode (RS485 mode) English
MSAC501-S(RS485) · Date 01.07.2019 · Art. No. 88115 · Mod. status 168/19
32
Command Length Reply Description
X 1
0xyy>
Ê
(6byte)
Sys register output in hex representation
(yy = hex representation of bit 0 ... 7)
Bit0 = sensor/band gap error 0: Gap okay;
1: Sensor/band distance too large
Bit1 = plausibility error absolute value
Bit2 = speed check
Bit3 = not used
Bit4 = adjustment 0: normal operation; 1:
adjustment running
Bit5 = verify error in EEPROM 0: no error;
1: Wrong values in EEPROM
Bit6 = CS error in EEPROM 0: no error; 1:
CS error occurred
Bit7 = error when reading/writing the
EEPROM 0: no error; 1: error
Yx 2
0xyy>
Ê
(6byte)
Output of flag registers 0, 1 and 2: (yy =
hex representation of bit 0 ... 7)
Flag-Register 0:
Bit0 = Unused, always 0
Bit1 = counting direction 0: Up; 1: Down
Bit2 = not used
Bit3 = Interpolator module 0: not availa-
ble; 1: available
Bit4 = Position value filtering 0: OFF; 1:
ON
Bit 6 Bit 5 Absolute resolution
0 0 10 Bit (factory setting)
0 1 9 Bit
1 0 8 Bit
1 1 7 Bit
Bit7 = Unused, always 0