MSAC501-S(RS485)
Documentation English
MSAC501-S(RS485) · Date
01.07.2019 · Art.
No.
88115 · Mod.
status
168/19
19
1 Documentation
There are further relevant documents - see list in original installation ins-
truction.
These documents can also be downloaded at "
http://www.siko-global.
com/p/msac501
".
2 Safety information
Safety information of original installation instruction apply.
3 Config Input
The meaning of these inputs is shown in the table below:
Config
Encoder function
GND (while enco-
der supply is being
turned on)
The sensor is in the "Service mode".
+UB (while enco-
der supply is being
turned on)
The sensor operates in the SIKONETZ3 mode.
3.1 Config
The "Config" input has two functions:
1. The Config input must be switched to +UB during power-up in order to
enable SIKONETZ3 operation mode for the sensor.
2. The sensor will switch over to the so-called "Service mode" if the Con-
fig input is on GND during power-up. The sensor can be parameterized
and queried for status information via the RS485 data interface which
has now turned bidirectional (D+, D-) (see chapter
9.2
).
Содержание MSAC501
Страница 34: ...MSAC501 S RS485 34 ...
Страница 35: ...MSAC501 S RS485 35 ...
