SIKA, Dr. Siebert & Kühn GmbH & Co. KG, Struthweg 7-9, 34260 Kaufungen, Germany
9/40
Tel: +49-5605-803-0, Fax: +49-5605-803-54, email: [email protected], web: www.SIKA.net
B.
U
SING THE INSTRUMENT
In order to use the device in all the safety required, all operators must read the paragraph on safety carefully, along
with the paragraph below.
B.1
Power-up
The device is delivered with 4 AA batteries of 1.5V each. It is wise to place these batteries in the compartment
provided for this purpose. To open up the compartment, unscrew the screw on the back of the box. Once the
batteries are in place, screw the cover back on.
Observe the polarity: an incorrect battery positioning could damage the device. The correct polarity is indicated
inside the compartment.
The figure below illustrates how to open the battery compartment as well as the correct positioning of each battery.
B.1.1
The keyboard
The keyboard features:
•
2 function keys (
F1
and
F2
) for the selection of the various menus displayed on the screen.
•
The navigator, consisting of 4 arrows (up
(
↑
↑
↑
↑
),
down
(
↓
↓
↓
↓
)
, right (
), left (
)
•
A clear key (
CLEAR
).
•
A device on/off and backlighting on/off key (
ON/OFF
).
Press briefly to start the device. During operation, press briefly to turn the lighting on or off. Press it longer
for 2 seconds to stop the device.
•
A validation key (
VAL
).
•
A HOLD key allows you to suspend a process temporarily (when pressed briefly). If you press it longer,
this key makes it possible to switch from measuring mode to emission mode and vice-versa.
Battery
compartment screw
