SIKA UC TC, Инструкция по эксплуатации

Страница: 5 / 40

SIKA, Dr. Siebert & Kühn GmbH & Co. KG, Struthweg 7-9, 34260 Kaufungen, Germany 5/40
Tel: +49-5605-803-0, Fax: +49-5605-803-54, email: info@SIKA.net, web: www.SIKA.net
A. G
ENERAL
A.1 Introduction
The UC TC is a portable thermocouple temperature calibrator (compliant with EC standards). It is especially
designed for calibration and maintenance. It makes it possible to measure and to emit electrical measurements and
to simulate temperatures both on site as well as in a laboratory. It performs voltage and temperature measuring and
emission functions (continuous or LF ramps).
The UC TC features a large number of related functions which extend its range of application, including:
•
Generation of default values, increases, single or cyclic ramps.
•
Storage of acquisitions and display in the form of tables or trend curves.
•
Use of calibrated sensors with their coefficients of correction
A range of improvements facilitates its operation:
•
Rapid access to all functions.
•
Intuitive user interface.
•
160x160 graphic display
•
Connection via 4 mm safety plugs or a miniature flat plug.
•
Power supply via 4 AA batteries or rechargeable batteries with internal charger (Option).
The device is fitted in an elastomer-sheathed ABS case.
A.2 Parts
General characteristics:
•
Portable device powered by 4 AA batteries (pack of Ni-MH storage batteries, 1.7 Ah optional).
•
Hand strap for carrying and use on-site
•
Graphic liquid crystal display: 160 x 160 pixels.
•
Choice of language used for messages and programming of functions, gauges and parameters via 6-key
ke 1 navigator.
•
Backlit display accessible via a keyboard key, with the possibility of automatic black-out after a specific
programmable period of inactivity.
•
Appearance: ABS case (elastomer-sheathed).
•
Dimensions : 157 mm x 85 mm x 45 mm (without coating).
•
Weight: 306 g without coating.
•
IP54 tightness in compliance with standard EN 60529
A.3 Safety
A.3.1 Compliance with safety standards
The device complies with the applicable standards in force on the subject of electrical safety (EN 61010) as well as
on the electromagnetic compatibility of the electrical measuring instruments (EMC: EN61326).
These instructions for use contain information and warnings which must be observed by the user to protect the
latter against the dangers of electricity, to ensure the safe operation of the device and to protect it against any
mishandling which could damage or compromise the safety of use of the device.