SIKA UC TC, Инструкция по эксплуатации, Страница: 24 / 40

SIKA, Dr. Siebert & Kühn GmbH & Co. KG, Struthweg 7-9, 34260 Kaufungen, Germany 24/40
Tel: +49-5605-803-0, Fax: +49-5605-803-54, email: info@SIKA.net, web: www.SIKA.net
D.4 Configuration of predefined set points
The configuration of default value points is performed in the configuration/Points menu, obviously providing the
default values mode has been confirmed.
•
Using the F1 key, select the configuration/Points menu.
•
Confirm using the VAL key.
•
Using the F1 key ( ) add a new value line to the table.
•
Using the navigation keys (
   
and ), select the digit that requires editing.
•
Using the navigation keys
(
↑ ↑ ↑ ↑
and
↓ ↓ ↓ ↓
)
, increase the value of the selected digit.
•
Confirm the line using the VAL key.
You can edit a value already recorded:
•
Using the navigation keys (
↑ ↑ ↑ ↑
and
↓ ↓ ↓ ↓
) , select the line requiring editing.
•
Press the navigation key ( ) to make editing possible.
You can delete a value already recorded:
•
Using the navigation keys (
↑
↑ ↑
↑
and
↓
↓ ↓
↓
) , select the line requiring deleting.
•
Press the key to delete the line.
Notes:
A maximum of 100 values can be entered.
This table of values is also used for the Synthesiser mode; consequently all changes to this table entail a change to
the synthesiser values.