SIKA UC TC, Инструкция по эксплуатации, Страница: 15 / 40

SIKA, Dr. Siebert & Kühn GmbH & Co. KG, Struthweg 7-9, 34260 Kaufungen, Germany 15/40
Tel: +49-5605-803-0, Fax: +49-5605-803-54, email: info@SIKA.net, web: www.SIKA.net
NOTE:
Attention, the choice of °C or °F is made in the
Setup\Preferences\temp unit menu
•
Using the F1 key, define the CSF used by positioning the cursor on it.
•
Enter the menu by pressing F2 .
•
Using the navigation keys (
↑ ↑ ↑ ↑
and
↓ ↓ ↓ ↓
) , choose the CSF (
OFF
: None,
ON
: internal or
programmed
).
•
Press
VAL
to confirm.
•
Press VAL (again) to confirm the desired function and go back to the measurement screen.
The
Measurement mode makes it possible to display the Min (bottom left), Average (bottom centre) and Max
values (bottom right) from the last RAZ Min/Max command.
•
Access this command by pressing the F2 key.
•
Using the navigation keys
(
↑ ↑ ↑ ↑
and
↓ ↓ ↓ ↓
),
position the cursor in the RAZ Min/Max field.
•
Confirm the latter using the VAL key.
Note:
Following a significant thermal shock, it is advisable to allow the device to stabilise its temperature to use the
internal reference junction (CSF) with the utmost precision.
C.1.2 Voltage or temperature emission by thermocouple
To access the
Emission
mode:
•
The choice of
Emission
mode is made using the
F2
key
(mode
menu
)
.
•
Using the navigation keys (
↑
↑ ↑
↑
and
↓
↓ ↓
↓
), position the cursor in the Emission field going down the menu.
•
Confirm your choice using the VAL key.