10
OPERATING INSTRUCTIONS, Continued
3.
REMOVING THE STRAP SLACK
Pull back on the TOP STRAP to
eliminate additional slack strap
around the package. NOTE: Do not
push down on the handle or slack
pull-out may become difficult. Do
not lift tension motor or straps will
slip.
Before continuing, make sure the
TOP STRAP is still in position, as
described earlier. Make sure that
both straps are also correctly
aligned with each other in the tool.
4.
TENSIONING THE STRAP
While standing to one side of the
strap, press tension lever (#1) all
the way down until it latches into
place.
The strap will tension around the
package until the proper tension
level has been reached, at which
time the motor will stall.
NOTE: If strap alignment on the package is unsatisfactory and it becomes necessary to shut off
the tool during tensioning portion of the cycle, move the catch link to the left to allow the tension
lever to release and stop tensioning. Cut the strap off and apply a new strap in a more favorable
position.
For Parts & Service 1-877-862-6699
WWW.TRADITIONALTOOL.COM
