Signode SLP-12, Руководство по эксплуатации, частям и безопасности

Страница: 24 / 35

24
PARTS LIST, TENSIONER MOTOR (STD 424150, HIGH-SPEED 424170)
STANDARD HIGH-SPEED
MOTOR MOTOR
424150 424170
KEY QTY PART NO. PART NO. DESCRIPTION
401 1 424166 424166 Lock nut
402 1 164969 164969 Retaining ring, N5000-118
403 1 023547 023547 Ball bearing
404 1 424159 424159 Idler carrier
405 3 422869 ~ Idler gear
406 1 424153 424153 Motor gear housing
407 1 090079 090079 Lock pin
408 1 422870 422870 Ring gear
409 1 424169 Adapter plate
410 2 423151 423151 Washer
411 2 014541 014541 Belleville spring washer, B1250-062
412 1 424157 424157 Spacer
413 1 306396 306396 Ball bearing
414 1 424158 ~ Idler carrier
415 1 ~ 424168 Idler carrier
416 3 024604 024604 Idler gear assembly
417 1 024608 024608 Ring gear
418 1 023481 023481 Ball bearing
419 1 424155 424155 Front end plate
420 1 424156 424156 Rotor
421 5 422818 422818 Vane
422 1 422815 422815 Cylinder
423 2 424164 424164 Spring pin, 2.5 x 10
424 1 424154 424154 Back end plate
425 1 424161 424161 Ball bearing
426 2 424172 424172 O-Ring, SAE 125
427 1 424173 424173 Motor housing assembly
428 1 424167 424167 Muffler insert
429 1 424165 424165 Muffler plate
430 1 424162 424162 Truarc, N5000-145
431 1 090065 090065 Lock pin
! When ordering parts, please show tool model, part number and description.
!
Standard hardware parts may be obtained from any local hardware supply.
!
Wearing parts are usually limited to those underlined and should be stocked.
NOTES:
1. Thread Gear Case (Key 406) into Motor Housing (Key 427) and torque to
10-12 foot-pounds (14-16Nm).
2. Replacement Collet and O-Ring can be purchased from Signode Service Parts
as Cartridge Repair Kit (Part Number 424048).
3. Apply high strength retaining compound to inner diameter and outer diameter of ball
bearing (Key 425).
4. Maintain a .002" clearance between back end plate (Key 424) and rotor (Key 420).
For Parts & Service 1-877-862-6699
WWW.TRADITIONALTOOL.COM