Signametrics Corporation SMU2060, Руководство оператора

Страница: 165 / 182

165
Signametrics
#define IDC_2400mA 21 // Current DC 2.4A range
/* 4-Wire Ohms */
#define OHM_4W_24
22 // 4 Wire 24 Ohms range
#define OHM_4W_240 23 // 4 Wire 240 Ohms range
#define OHM_4W_2400 24 // 4 Wire 2.4k Ohms range
#define OHM_4W_24K 25 // 4 Wire 24k Ohms range
#define OHM_4W_240K 26 // 4 Wire 240k Ohms range
#define OHM_4W_2400K 27 // 4 Wire 2.4M Ohms range
#define OHM_4W_24MEG 28 // 4 Wire 24M Ohms range
/* 2-Wire Ohms */
#define OHM_2W_24
29 // 2 Wire 24 Ohms range
#define OHM_2W_240 30 // 2 Wire 240 Ohms range
#define OHM_2W_2400 31 // 2 Wire 2.4k Ohms range
#define OHM_2W_24K 32 // 2 Wire 24k Ohms range
#define OHM_2W_240K 33 // 2 Wire 240k Ohms range
#define OHM_2W_2400K 34 // 2 Wire 2.4M Ohms range
#define OHM_2W_24MEG 35 // 2 Wire 24M Ohms range
#define OHM_2W_240MEG 36 // 2 Wire 240M Ohms range
/* Diodes */
#define DIODE_100n
37 //Test current = 100nA
#define DIODE_1u 38 // 1uA
#define DIODE_10u 39 // 10uA
#define DIODE_100u 40 // 100uA
#define DIODE_1m 41 // 1mA
#define DIODE_10m 42 // 10mA (2064 only)
// All functions below are only for 2064 type DMM.
// Module internal temperature sensor
#define LOCAL_TEMP
43 // Internal temperature measurement
/* Ramp type Capacitance */
#define CAPS_1200p
44 // 1,200pF range
#define CAPS_12n 45 // 12,000pF range
#define CAPS_120n 46 // 0.12uF range
#define CAPS_1200n 47 // 1.2uF range
#define CAPS_12u 48 // 12uF range
#define CAPS_120u 49 // 120uF range
#define CAPS_1200u 50 // 1,200uF
#define CAPS_12m 51 // 12,000uF
// RTD Types. Resistance 4 wire config. Set Ro parameters
// to be set using DMMSetRTD(nDmm, Rzero)
#define pt385
52 // pt385 RTD
#define pt3911 53 // pt3911 RTD
#define pt3916 54 // pt3916 RTD
#define pt3926 55 // pt3926 RTD
#define cu 56 // 10 or 100 Ohms Copper RTD
// VDC source
#define VDCSource
57 // VDC source 0 to +/-10V
// VAC source
#define VACSrc900mV
58 // VAC source 0 to 3.3V RMS
#define VACSrc8V 59 // VAC source 0 to 7.25 RMS (20V p-p)
// DC Current source ranges. User DMMSetIDCSource() to set value
#define IDCSource1200n
60 // IDC source 1.25uA
#define IDCSource12u 61 // IDC source 12.5uA
#define IDCSource120u 62 // IDC source 125uA
#define IDCSource1200u 63 // IDC source 1.25mA
#define IDCSource12m 64 // IDC source 12.5mA