SIGMATEK HGW 1033, Руководство по эксплуатации

Страница: 78 / 84

HGW 1033-3 WIRELESS HANDHELD OPERATING PANEL
16.2 Configuring Safety Components
16.2.1 Minimum System Requirements
Component Version
SAFETYDesigner ≥ 01.01.056 (Build: 2058)
SCP 111 firmware version ≥ 00.1049.448
INFORMATION
The actual time-out configured in the SCP 111 must be included in your
risk assessment!
Note that when coupled, the HGW 1033-3 is automatically decoupled
after 30 days at the latest. This triggers an emergency stop in the
coupled machine. To avoid this, decouple and recouple the operating
panel within 30 days. One hour before the regular test, a warning
message appears that reminds the user to recouple.
CAUTION
If the panel goes into safe mode, the application must deactivate the
emergency stop light.
Si le panneau passe en mode de sécurité, l'application doit désactiver
le signal lumineux d'arrêt d'urgence.
16.2.2 Adding the HGW 1033-3 to a SAFETYDesigner Project
To use the HGW 1033-3 in a Safety project, it must be integrated as follows:
1. Create a new project or open an existing one.
2. Add an “SCP 111” to the “hardware tree” if not already available.
3. Right-click on “0-SAFETY WIRELESS” , then via Add-Device, add the “HGW_
1033_3 (HGW-WLAN)” .
Page 76 03.03.2021