SIGMATEK HGW 1033, Руководство по эксплуатации

Страница: 50 / 84

HGW 1033-3 WIRELESS HANDHELD OPERATING PANEL
Number Message Definition Cause/Solution
18 SINGLE STEP The CPU is in single step
mode and is waiting for
further instructions. Info
19 READY: A module or project has
been sent to the CPU and
it is ready to run the
program. Info
20 LOAD The program is stopped
and the CPU is currently
receiving a new module or
project. Info
21 INVALID MODULE The CPU has received a
module that does not
belong to the project. Solution:
n
Recompile and download the
entire project
22 MEMORY FULL The operating system
memory (heap) is too
small. No memory could
be reserved while calling
an internal function or an
interface function is called
from the application. Causes:
n
Memory is only allocated but
not released.
Solution:
n
Clear memory
23 NOT LINKED When starting the CPU, a
missing module or a
module that does not
belong to the project was
detected. Solution:
n
Recompile and download the
entire project
24 DIV BY 0 A division error has
occurred. Possible Causes:
n
Division by 0.
n
The result of a division does not
fit in the result register.
Solution:
n
Correct programming error.
25 DIV BY 0 A division error has
occurred. Possible Causes:
n
Division by 0.
n
The result of a division does not
fit in the result register.
Solution: Correct programming
error.
Page 48 03.03.2021