SIGMATEK HGW 1033, Руководство по эксплуатации

Страница: 59 / 84

WIRELESS HANDHELD OPERATING PANEL HGW 1033-3
9.4 Configuration
The operating panel can be configured in LASAL via the USB interface (5.1.2 ) or WLAN.
INFORMATION
Never operate the panel without antennae. This can result in damage to
the device.
At the time of delivery, the panel is configured as an access point and the network is
accessible with the following parameters.
The serial number is contained in the network name (SSID). This can be found on the
reverse side of the panel on the product label.
9.4.1 Example
Serial number HGW 1033-3: 12345678
SSID 2.4 GHz network: SN12345678_SIG_11
SSID 5 GHz network: SN12345678_SIG_10
Parameters Default value
SSID 2.4 GHz network SN<serial number>_SIG_11
SSID 5 GHz network SN<serial number>_SIG_10
Password for both networks 12345678
IP address / mask 2.4 GHz network 192.168.2.1 / 255.255.255.0
IP address / mask 5 GHz network 192.168.1.1 / 255.255.255.0
INFORMATION
Problems can arise if a control is connected to an IP network, which
contains modules that are not running with a SIGMATEK operating
system. With such devices, Ethernet packets could be sent to the control
with such a high frequency (i.e. broadcasts), that the high interrupt load
could cause a real-time runtime error or runtime error. By configuring
the packet filter (Firewall or Router) accordingly however, it is possible
to connect a network with SIGMATEK hardware to a third party network
without triggering the error mentioned above.
03.03.2021 Page 57