Sigineer Power MS6048D, Руководство пользователя

Страница: 47 / 48

www.sigineer.com
45
In
v
er
te
r
M
o
d
e
Battery Voltage 48 VDC
Output Waveform Pure Sine Wave
AC Voltage Regulation (Batt. Mode) 120/240 VAC ± 5%
Surge AC Output Power 18000W
Output Frequency 50Hz/60Hz(default)
Max. Output Fault Current/ Duration
90A/ 300μs
Max. Output Overcurrent Protection 65A
DC To AC Efficiency (Peak) 94%
Overload Protection 10s@101%~150% load; 5s@≥150% load
Cold Start Battery Voltage* (Without
PV or AC)
Low DC Cut-Off V2Vdc /Li Mode(Low DC Cut-off
SOC +10%)
Minimal Battery Voltage To Activate
AC Charger(Without PV)
40.8Vdc
Low DC Warning Voltage (Lead-Acid
Mode)
44.0Vdc @ load < 20%
42.8Vdc @ 20% ≤ load < 50%
40.4Vdc @ load ≥ 50%
Low DC Warning Return
Voltage(Lead-Acid Mode)
46.0Vdc @ load < 20%
44.8Vdc @ 20% ≤ load < 50%
42.4Vdc @ load ≥ 50%
Low DC Cut-off Voltage (Lead-Acid
Mode)
42.0Vdc @ load < 20%
40.8Vdc @ 20% ≤ load < 50%
38.4Vdc @ load ≥ 50%
Low DC Cut-off Voltage (Li Mode) 42.0Vdc
Low DC Warning SOC (Li Mode) Low DC Cut-off SOC +5%
Low DC Warning Return SOC (Li
Mode)
Low DC Cut-off SOC +15%
Low DC Cut-off SOC (Li Mode) Default 20%, 5%~50% settable
High DC Recovery Voltage 58Vdc
High DC Cut-off Voltage AGM:60V, FLD:62V, USE or Li Mode: C.V. V 4.0V
Idle Power
＜
35W
C
h
ar
g
e
M
o
d
e
CV & Float Charge voltage 48.0V~58.4V Settable
AC charge voltage range
@191V-265V,100% Charging
@155V-190V,Max charging current 30A
@>265V,charger deactivated, recovers at 260V
Maximum PV Array Power 4500W
Max PV Input Current 22A
MPPT Efficiency 98.0% max.
PV Open Circuit Voltage 250Vdc
PV Charger Start-up Voltage 150Vdc
±
10Vdc
MPPT Range @ Operating Voltage 120-430VDC
Overcharge Protection 60Vdc
Maximum Solar Charge Current 100 A
Maximum AC Charge Current 80 A
Maximum Charge Current(PV+AC) 100 A
Battery Voltage Accuracy +/-0.3%