Sigineer Power MS6048D, Руководство пользователя

Страница: 13 / 48

www.sigineer.com
11
same protocol.
To monitor the inverter on a computer, please download the software (
SG Solar Power Monitor ) from our
website in the Support>Software Download section.
The V Series inverters can be remotely monitored by a Wi-Fi or GPRS module plugged into its USB port.
The Wi-Fi / GPRS module is a plug-and-play monitoring device which allows users to monitor the status of
the PV system from a mobile phone APP or from the website anytime anywhere.
The inverter’s AC output power can be powered on and off via APP.
The Sigineer Monitor APP will automatically refresh the data in every 5 minutes. To access real date, please
roll down the screen to refresh.
To monitor the inverter via both WiFi and USB port, the RMT-WiFi module can be connected via a short
extension cable.
2.4.7 LCD & Specification Setup
Press the On/Off switch to turn on the unit.
The operation and display panel area includes three LED indicators, four function keys and a LCD display.
It shows very rich operating info.
1 LCD display 2 Status indicator 3 Charging indicator 4 Fault indicator 5 Function buttons
LED Indicator Operation Status
Green Solid On Output is powered by utility in AC mode.
Flashing Output is powered by battery or PV in battery
mode.
Green Solid On Battery is fully charged.
Flashing Battery is being charged.
Red Solid On Fault occurs in the inverter.
Flashing Warning condition occurs in the inverter.
Button Description
ESC To exit setting mode
UP To go to previous selection
DOWN To go to next selection
ENTER To confirm the selection in setting