SiFive E2* Core IP Series Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 41

SiFive E2* Core IP Series Скачать руководство пользователя страница 3

SiFive Core IP FPGA Eval Kit User
Guide

Proprietary Notice

Copyright © 2016-2019, SiFive Inc. All rights reserved.

Information in this document is provided “as is”, with all faults.

SiFive expressly disclaims all warranties, representations and conditions of any kind, whether
express or implied, including, but not limited to, the implied warranties or conditions of
merchantability, fitness for a particular purpose and non-infringement.

SiFive does not assume any liability rising out of the application or use of any product or circuit, and
specifically disclaims any and all liability, including without limitation indirect, incidental, special,
exemplary, or consequential damages.

SiFive reserves the right to make changes without further notice to any products herein.

Release Information

Version

Date

Changes

v3p0

Feb 28, 2019

Updated for 19.02 Core IP Release

• Supports v19.02 Core IP Package

• Added descriptions for Arty-100T

• Added Chapters for E2, E3/S5, E7/S7 MCS

Images

v2p0

Feb 2, 2018

Updated to match v2p0 of the Evaluation MCS:

• FPGA Eval includes ITIM

• DTIM size increased to 64kiB

• Number of HWBP increased to 8

• Added User Mode Support

• Updated various links

v1p0

May 4, 2017

First release

i

«
1
2
3
4
5
...
»

Содержание E2* Core IP Series










































Отзывы:

Нет отзывов