Sierra Wireless AirPath 300, Руководство пользователя

Страница: 17 / 45

Getting Started AirPath 300 for Visor User Guide
Page 8 2130060 Rev 1.1
is sufficient to provide a trickle charge to the AirPath module
battery but is not enough to simultaneously power the
radio/modem for normal use. To use the AirPath module
while trickle charging the handheld, the AirPath 300 DC
adapter must also be used.
Handheld devices without their own rechargeable battery may
also be able to use the Travel Charger to deliver power to the
AirPath module. Not taking power to charge a handheld
battery, these models can provide sufficient power to support
normal use of the AirPath 300 while trickle charging. If you
are unsure of the capability of your particular handheld you
should always use the AirPath DC adapter to charge the
module.
3.2. Attaching the Antenna
Attach the antenna to the connector in the top right corner of
the AirPath 300 (above the LEDs). The antenna simply
presses into place.
The antenna should bend easily at the hinge. Do not
forcefully bend the antenna.
3.2.1. Recommended Antenna Position
Due to the radio frequency interference inherent in all
electronic computing devices, the strength of the signal can be
affected by the orientation of the antenna. For best results, the
antenna should be
aligned with the elbow
hinge rotated toward
the back of the
handheld (away from
the screen) and the
antenna pointing
upward, as shown.