Sierra Wireless AirPath 300, Руководство пользователя

Страница: 18 / 45

AirPath 300 for Visor User Guide Getting Started
2130060 Rev 1.1 Page 9
3.3. Inserting the AirPath 300
You do not have to turn the handheld device off before you
insert the AirPath 300.
Insert the AirPath 300 into the Springboard expansion slot of
your handheld device until the connectors are secure. Do not
use excessive force, since this may damage the connector pins.
If the handheld device was off, it will automatically turn on.
The Service Connection Progress screen opens to indicate the
handheld is connecting with the AirPath 300 module.
The applications for browsing the Web and checking your
email are then automatically loaded from the AirPath 300 onto
the handheld device
1
.
3.3.1. Turning the Unit On and Off
The AirPath 300 does not have an on/off switch.
The AirPath 300 automatically turns on when:
•
You insert it into the handheld device (if the
handheld is off, it will turn on automatically)
•
You start Watcher or another application that requires
Internet or email access
•
You insert the DC adapter, or in some cases, the
handheld’s Travel Charger. See section 3.1.1.
The AirPath 300 automatically turns off when:
•
You tap the Shutdown button in the Watcher
application to deregister from the network and turn
off the AirPath module
CAUTION
Removing the AirPath module without first using the
Shutdown option in Watcher is strongly discouraged. This
can cause disruption because the AirPath adapter will not
have deregistered from the network.
1
The applications are removed from the handheld device when you remove
the AirPath 300.