Sierra Wireless AirPath 300, Руководство пользователя

Страница: 28 / 45

AirPath 300 for Visor User Guide Using the Modem
2130060 Rev 1.1 Page 19
When the AirPath module is removed, the power indicator
will go on for approximately 10 seconds; this is normal.
To preserve battery life, remove the AirPath from the
handheld if you will not need network access for an extended
period.
4.7. Synchronizing your Handheld Device
If you are using a HotSync cradle to synchronize your
handheld device, you must remove the AirPath 300 from the
handheld before you insert the handheld into the cradle (for
information on removing the AirPath 300, see section 4.6).
If you are using a USB Travel cable to synchronize your
handheld device, you do not need to remove the AirPath 300
from the handheld.
If you are using a Visor Prism or Edge, and a Travel Charger
(can be purchased separately) to synchronize your handheld
device, you do not need to remove the AirPath 300 from the
handheld. See section 3.1.1 on page 7 for important
information on charging and using the AirPath with the Travel
Charger.
4.8. Running the AirPath Configuration
Program
The first time you use the AirPath 300, the AirPath
Configuration program will automatically launch. You can
use it to configure your account (for more information, see
section 3.4).
The only time you would need to manually run the program is
if one of the following is true:
•
You need to change your account parameters
•
You want to find out the parameters (for example,
technical support requests the information)
To manually run the program:
1. From your handheld’s HOME screen, tap Watcher .
The Watcher screen appears.
2. Tap Configure .