Sierra Wireless AirPath 300, Руководство пользователя

Страница: 16 / 45

2130060 Rev 1.1 Page 7
3. Getting Started
Before you use the Sierra Wireless AirPath 300, you must:
1. Charge the battery for at least four hours
2. Attach the antenna
3. Insert the AirPath 300 into the handheld device
4. Configure the AirPath 300 with your CDPD account
The following sections describe these tasks in detail.
3.1. Charging the Battery
NOTE
Before you use the AirPath 300 for the first time, you must
charge the battery for
at least 4 hours .
Use only the provided DC power adapter to charge the
AirPath 300.
To charge the battery of the AirPath 300, connect the plug of
the DC power adapter (provided with the AirPath 300) into the
connector on the top left corner of the AirPath 300 (near the
AirPath 300 logo).
You can continue to use the AirPath 300 during battery
charging with the DC adapter.
When the battery is being charged, the Power LED flashes
red. When the battery is fully charged, the LED is solid red.
3.1.1. Charging Through the Handheld
CAUTION
DO NOT attempt to operate the AirPath modem when trickle
charging
both devices via the Visor cradle or optional
Travel Charger. This can reduce the AirPath module’s
battery life.
An optional Travel Charger can be used to charge the battery
in Visor Prism and Edge handhelds. When this cable is used,
some power is also provided to the AirPath 300 module. This