Sierra Wireless AirPath 300, Руководство пользователя

Страница: 19 / 45

Getting Started AirPath 300 for Visor User Guide
Page 10 2130060 Rev 1.1
•
You exit your web browser or e-mail application
(power off is delayed by a duration you configure in
the Network Preferences of the handheld)
•
You turn off the handheld device (the AirPath 300
turns off after approximately 10 seconds)
•
You remove the AirPath module from the handheld
device (the AirPath 300 turns off after approximately
10 seconds)
NOTE
The handheld will reset when the AirPath 300 module is
removed.
To preserve battery life, remove the AirPath adapter from the
handheld if you will not need network access for an extended
period.
3.4. Configuring the AirPath 300
The first time you insert the AirPath 300 into your handheld,
the AirPath Configuration program will automatically launch.
This program controls the modem’s connection to the
Wireless IP (CDPD) network.
1. Contact the Wireless IP network provider you wish to
use, and state that you wish to activate an account for
your CDPD modem.
The Wireless IP service provider will ask you for the
EID of the modem. The EID is displayed in the top
portion of the AirPath Configuration screen, and also
on the label of the AirPath 300 module, in the format
00-A0-xx-xx-xx-xx.
The service provider will give you values for an NEI
(IP address), DNS, SPNI, and side preference. Write
this information down. (After you have finished
configuring your AirPath 300, you should keep this
information in a safe yet accessible place).
2. In the AirPath Configuration screen, enter the NEI,
DNS, SPNI, and side preference.
The SPNI entry can have zero, one, or more SPNI
values, separated by commas. The AirPath 300 will
accept service only from a provider on the list. If the