User Manual
46
Infrared Video
General Information
The infrared video with temperature information taken by
RAZ-IR® NANO
can be transferred to PC via 2GB mini SD card or through USB2.0 for
further analysis by Guide IR software. The Infrared video function is displayed in the computer and controlled by the Guide IR Analyser. Before
the communication please install the USB driver and IR Analyser into your computer.
PC System Requirements
Operating system: Window 2000 or higher (IE5.0 or higher)
Software: Microsoft
®
Office 2000 or higher
Hardware:
Processor
Pentium 4 2.4G or Above
RAM
At least 512M
Others
Independent Graphic Card
Using commands for infrared video analysis
After connecting the camera of
RAZ-IR® NANO
to the PC and operate the IR Analyser, you can use the relative commands to do all kinds of
analysis and remote control the
RAZ-IR® NANO
.
Video Command
Use this command to get infrared video from
RAZ-IR® NANO
directly or directory path of the PC where the films are saved
Device Video
Make sure the camera of
RAZ-IR® NANO
is under normal working status and connect the
RAZ-IR® NANO
with the PC via USB2.0 to activate
this command; it will bring a dialog box as following
Select M8 and press ok to confirm, the infrared video is open as following
