User Manual
4
Introduction
This publication provides the necessary information required to safely operate the
RAZ-IR® NANO
Thermal Camera.
It is important to fully check all equipment with which you have been supplied.
The equipment should be used, maintained and serviced by suitably trained personnel, capable of carefully following the procedures and
guidelines given in this User Manual.
All User Manuals and leaflets should be read thoroughly before proceeding with operation of the equipment.
It is also advisable that all User Manuals and Instruction Leaflets supplied are kept readily available, for reference when the equipment is in
general use.
Precautions
The following precautions must be adhered to at all times and must be considered in addition to any advised precautions issued at the relevant
worksite or work area.
•
Keep the
RAZ-IR® NANO
Thermal Camera steady during operation.
•
Do not use the
RAZ-IR® NANO
Thermal Camera in temperature exceeding its working and storage temperature ranges.
•
Do not direct the
RAZ-IR® NANO
Thermal Camera at very high intensity radiation sources such as the sun, carbon dioxide lasers or
arc welders etc.
•
Do not expose the
RAZ-IR® NANO
Thermal Camera to dust and moisture.
•
When the
RAZ-IR® NANO
Thermal Camera is not in use or is to be transported, ensure that the unit and its accessories are stored in
the protective carry case.
•
Do not obstruct the ventilation holes or loudspeaker on the camera body.
•
Do not restart the camera until 15 seconds after switching it off.
•
Do not throw, knock or vibrate intensely the camera and its components in order to keep them from damage.
•
Do not attempt to open the camera body, as this action will void the warranty.
•
Keep the SD memory card for the exclusive use of the camera.
The
RAZ-IR® NANO
Thermal Camera utilizes a Lithium Ion (Li-Ion) rechargeable battery pack. The following safety precautions must be
adhered to at all times to ensure the safe use of this equipment.
•
Do not disassemble or attempt to open the battery under any circumstances.
•
Do not expose the battery to fire or high temperatures.
•
Do not short circuit the battery.
•
Do keep the battery dry.
•
Charging of the battery should only be carried out using the recommended or supplied charging device.
Maintenance
To ensure that the
RAZ-IR® NANO
Thermal Camera is kept in good working condition and remains fully operational, the following guidelines
should be adhered to at all times.
Non-optical surfaces
The non-optical surfaces of the camera can be cleaned when required, with a soft cloth dampened with water and a mild detergent.
Optical surfaces
