User Manual
30
Option System
Click option System with the touch pen or press the button M to select it. Then the System dialog box appears on the screen.
•
Clicking each option box with the touch pen or pressing button OK can toggle between the options. Clicking each value respectively with the
touch pen or moving the button up or down can alter values of the option. Moving the button left or right can toggle between each digit of the
option values if the values contain several digits.
•
TempUnit:
To set the temperature unit for measurement, degrees Celsius or Fahrenheit.
•
FrameAver:
To set the number of frames for frame averaging algorithm to freeze image.
•
Language:
To select the language for man-machine communication.
•
VideoOut:
To turn on or off the video output function. PAL and NTSC can be selected as per requirements. Off means only the VGA output
is available.
•
Storage:
To choose the memory medium where to save files. If SD card is inserted in the camera, the default medium is SD card. But you
can switch to the built-in flash memory as per need. To switch between the two memory media, you can either set UFlash for Storage here or
click the icon shown in the memory media bar under the image screen.
•
M Option:
To display the max temperature in the screen if set it as “Max”, or displays the min temperature in the screen if set it as “Min”.
Also there are two options for the temperature alarm function, one is max, the other is min. When you set this M option as max, it means that
the alarm is for high temperature alarm, when the temperature is exceeding the set value, the camera will give alarm. When you set it as min,
it means that the alarm is for low temperature alarm, when the temperature is lower than the set value, the camera will give alarm.
•
Choose button OK or press the M button on the keyboard to save the change; choose button Cancel or press C button on the keyboard to
cancel change. Then the dialog box will be closed and the original image status will be resumed.
Option Function
•
Click option Function with the touch pen or press the button M to select it. Then the Function dialog box appears on the screen.
