User Manual
13
Introduction to Buttons
BUTTON
FUNCTION
On/ Off
Power on/off
To bring out / hide main menu
To enter menus and its sub menus
To select one sub menu or option under menu
To confirm parameter setup/ option selected
(Up)
To bring out temperature setup menu to adjust Tmax, palette, Tmin if necessary
Button Up-direction
(Left)
To bring out / retract information bar
Button Left-direction
(Right)
To bring out analysis bar in live thermal image
Button Right-direction
(Down)
To zoom in/out
Button Down-direction
To cancel one sub menu or option under menu
To exit menu
To return to the live thermal image when image is frozen
To perform a NUC manually when there is no menu on live image
To select one sub menu or option under menu
To freeze and store live image when menu does not appear on screen.
PIC mode
To switch among the three display modes: Thermal image alone, Visual image alone and IR
fusion image, if the fusion function is set as “on”.
To replay the visual image and IR fusion either in dynamic live status/frozen/ replay status, vice
versa.
When menu does not appear on screen, keep it depressed for three seconds to switch
between Auto and Manual mode
W/T Wheel
Rotate the W/T wheel to adjust focus manually
Press the W/T wheel inwards and then release to start auto focus in dynamic live status
Laser
To activate laser locating function
