User Manual
18
•
Press button OK again to save the frozen image directly into the memory media (built-in flash memory or mini SD memory card). Then name
of the saved image “IR******” will be displayed at the up left corner of the screen for 2 seconds.
•
Or you can do multiple kinds of operation on the frozen image before saving it into the memory media, such as static temperature
measurement, temperature range adjustment, spot analysis, line analysis, area analysis, isotherm analysis, discretional area analysis,
recording and playback of voice annotation, adding text annotation, etc.
•
When there is no menu displayed on the frozen image, you can do static temperature measurement and temperature range adjustment as
per instruction aforesaid.
•
To do the left operation listed below, press button M to enter main menu and then press button Left or Down to highlight menu Tools, press
button Up to highlight submenu Analysis and press M to bring up the Analysis bar. The operation is also can be done by touch pen to click
each icon to select a certain one. The detailed analysis operation will be introduced in separate sections later.
•
Functions of the icons in the toolbar are listed as below. Press button OK can toggle between each icon. Or simply use the touch pen to click
each icon to select. For detailed operation of analysis function by buttons, please refer to the RS232 software operation introduction in this
user manual.
Icon
Significance
Function
Exit command
Exit the analysis toolbar
Spot analysis
Do spot analysis
