MapIT G2 Hardware Installation Training Manual
Confidential – June 2014
12
•
Input 100-240v
•
50-60Hz, 0.6A
•
6v DV, 3.3 Amp
•
Use two per MCP or DCP if redundant power is desired
•
Use of a non-Siemon power supply will void the system warranty
•
Power supply comes with adapters for US, UK, Australia, Europe and China
•
SPPs and SFEs do not have their own power supplies. Power is provided to
them via the Control Bus Cable
Smart Patch Panels (SPP/SPPA/TPPA)
MapIT G2 smart patch panels and fiber enclosures SFPs have capabilities beyond any
other product in our industry today. The ability to track connections is built into the
panel. This reduces rack space required for monitoring equipment by up to 89%. The
system also uses much less power than competing systems. Finally, it does not
require proprietary cables to devices in the system. The use of standard 5e solid
shielded cable reduces cost and speeds installation time. Also, fewer cables are used
to connect items in the system, so less space is required for pathways. The Smart
Panels/Enclosures also feature two LEDs and an LCD which provide a local user
interface, which can save significant time during diagnostics and work order
provisioning.
The SPP (flat smart patch panel) and SPPA (angled smart patch panel) are typically
sold empty and accept Siemon keystone ZMAX outlets. The TPPA (angled TERA
smart panel) accepts Siemon TERA outlets.
Smart Panel Dimensions
Component
Width
Height
Depth
SPP (Flat)
483 mm
19 in
45 mm
1.75 in
170 mm
7.0 in
SPPA (Angled)
483 mm
19 in
45 mm
1.75 in
225 mm
8.86 in
TPPA (TERA
Angled)
483 mm
19 in
45 mm
1.75 in
225 mm
8.86 in
The Front of the MapIT G2 Smart Patch Panels
Flat Panel
