manualshive.com logo in svg

Siemens TS2000, Руководство по обслуживанию, Страница: 48 / 65

Поделиться
Скачать
Siemens TS2000 Скачать руководство пользователя страница 48

TS2000 Service Manual 

RD7409290-0 Rev. F 

 

6-2

Messages 

Solution 

Parallel card has no number 

• 

Make sure the program was activated. 

Modem Error 

• 

Check power to the modem 

A message on system startup 

• 

Check the connection between the 

modem and the computer. 

• 

Make sure the modem is set to start up 

with the system 

Error Message: PM is not 
responding to message 6... 

• 

Check the Serial Communication cable 

connection in the back of the system. 

• 

Check that the 3 LED’s on the P.M. 

board are ON 

• 

Check the voltages on the J2 connector 

on the PM. The voltages should be 5 
Volts, +12 and -12 Volts. 

• 

Check that the setup for Com1 is 

115200. 

• 

Check parallel cable connected the PM 

adapter to the I/O card. 

Amplitude Error / over 
current 

• 

Check that there are no foreign metals 

on the probe. 

• 

Check the connection cable between 

the PM and the handheld cylinder.  

• 

Press the "GO" button on the probe 

again.  If the system is still not 
responding appropriately, reboot the 
system. 

 

6.1.2  TransScan TS 2000 Error Message 

1. 

Enter “Database." 

2. 

Select “Service”/ “Errors” and Click “Print Last 10 
Logs." 

SPB7-520.840.01.01.02

Содержание TS2000


































































Отзывы:

Нет отзывов