Siemens TS2000 Скачать руководство пользователя страница 31 | Manualshive

Страница: 31 / 65

Siemens TS2000 Скачать руководство пользователя страница 31

TS2000 Service Manual

RD7409290-0 Rev. F

4-3

4.3 Upgrade of TS2000 Software

On a time-to-time basis, TransScan will supply a new version of
software for the

TS2000 System. The upgrade will be supplied on a CD-ROM, and
will be performed by the service engineer.

To perform the upgrade:

1.

Install the CD with the new software version into the CD-
ROM Drive (the CD has an auto-run program).

2.

Wait for approximately 15 seconds after the program
begins and click “Next."

3.

After successfully loading the software, click on
“Finish”.

If AutoRun does not start, proceed as follows:

1.

From the “START” Menu select “RUN”, then
“BROWSE”.

2.

From the CD Menu select “SETUP”/ “OPEN”.

3.

Click “OK”; the program will then install the new
version on your system.

4.

Click “FINISH”, remove the CD and restart the system.

4.4 Additional Software Installation

To install the software used in this system (which should be in the
“windows” screen), follow the instructions below:

4.4.1 WIN NT4 Installation (Including Service Pack 4)

1.

Access the computer's BIOS setup. (Press "Del" when
the computer boots-up.)

2.

From "Boot Order," select CD-ROM as the first boot
drive.

3.

Insert the WIN NT4 CD into the CD-ROM drive.

4.

Re-boot the system. The WIN NT4 installation begins
automatically.

5.

Select "Setup Windows NT Now," and press "Enter"
twice.

6.

Press "Page Down" and then press F8.

SPB7-520.840.01.01.02

«
...
29
30
31
32
33
...
»

Содержание TS2000


































































Отзывы:

Нет отзывов