manualshive.com logo in svg

Siemens TS2000, Руководство по обслуживанию, Страница: 17 / 65

Поделиться
Скачать
Siemens TS2000 Скачать руководство пользователя страница 17

TS2000 Service Manual 

RD7409290-0 Rev. F 

2-7

2.4  General System Work Flow 

When a scan is performed, the system sends an electrical current through the 
transmitter cable into the hand-held cylinder.  The current then flows through 
the patient's body and is detected by the scan probe.  The current is then 
picked up by the scan probe.  The current picked up by the scan probe is sent 
to the TransScan system that determines the changes in the electrical 
impedance.  The output is then displayed on system monitor. 

2.5  Monitor 

The monitor specifications are as follows: 17 inch super VGA, 640 

×

 

480. The monitor provides the display of the user interface, including 
all patient data entries and their resulting T-Scan images.  

2.6  Keyboard and Mouse 

The keyboard and mouse are standard PC compatible devices that are 
used by the TS2000 for system operation and data entry. 

2.7  Main System Console 

The Main System Console is comprised of the Computer Base (PC), 
the Processing Module (PM) and the Probe Selection Board (P.S.B.). 

2.8  Computer Base (PC) 

The Computer base is a PC with the following configuration:  

• 

Intel Celleron A300 MHz (or better) with 256 kb EXT. 
cache, or equivalent CPU 

• 

32 MB RAM 

• 

6.4 GB hard disk, or larger 

• 

AGP VGA adapter 

• 

1.44 MB floppy disk (optional) 

• 

CD-ROM drive 

• 

ZIP Drive 

The PC platform has a medical grade requirement, which refers to the 
ability of the PC power supply to meet the AC mains leakage current 
requirements. 

The Computer Base is the master controller of the system. It is 
responsible for the user interface, real-time acquisition, processing and 
display of the sensor data sampled by the Processing Module, as well 
as database archiving and replay, hard copy, and  communications. 

SPB7-520.840.01.01.02

Содержание TS2000


































































Отзывы:

Нет отзывов