Siemens TS2000, Руководство по обслуживанию, Страница: 35 / 65

TS2000 Service Manual RD7409290-0 Rev. F
4-7
5.
After the system restarts, click “Exit” and “Exit to
Windows."
1. From the “Start” menu, select “Programs”.
2. From the PcAnywhere 32 menu, select the
PcAnywhere program.
3. From the program screen, select “Be a Host PC”.
4. From the File menu, select “Application options”.
5. In the “Host operation” dialog box, select “Ring
number = 4 and click on “OK”.
6. Right click on the Modem Icon.
7. From the menu, click on Properties.
8. Click on the “Settings” tab and then click on the
“Start with Windows” box.
9. Click “OK” and then click “Exit the Program”.
4.4.5 Zip Drive Software installation
1.
From the “Welcome” screen, click on “Exit"/ “Exit to
Windows."
2.
Insert the “IOMEGA” software CD into the CD drive
3.
Let the “AutoRun” program to start.
4.
Select “English”
5.
Click “Next” “Yes” “Next”
6.
Software will load itself to the disk.
7.
Click “OK” (If needed follow the instruction in the
information screen)
8.
(If the Windows NT Setup box appears with the message:
“The Drivers…are already on the system”, click “New”;
the Window NT Setup box appears.)
9.
Remove CD and Click on “OK” to restart the computer.
4.4.6 Installation of ODBC Software
1.
Insert the CD with the new software version into the CD-
ROM Drive
2.
Wait 15 seconds; the TS2000 installation program will
start.
3.
In the welcome dialog box, click “Cancel."
4.
In the Exit Setup dialog box, click “Exit Setup."
5.
With the NT explorer, browse the CD (should be drive
F).
SPB7-520.840.01.01.02