Siemens Synco 900, Монтаж и пусконаладка

Страница: 23 / 88

23/88
Siemens Synco 900 CE1C2707en
Building Technologies Commissioning the system 05.07.2007
Switching
group Factory setting Your setting Switching group
name
5 --- ---
Switch
Dim
Blind
Scene
…………………
6 --- ---
Switch
Dim
Blind
Scene
…………………
7 --- ---
Switch
Dim
Blind
Scene
…………………
8 --- ---
Switch
Dim
Blind
Scene
…………………
Prior to changing an already defined switching group function,
all RF actuators connected to the switching group must be
disconnected (refer to ”Disconnecting devices” on page 58).
Before switching group function "Switch" can be changed,
any connected switching group relay must be disconnected
and deactivated.
Per default, info pages 1 – 8 are assigned to the 4 pairs of
soft keys. The info page numbers can be changed on the
user level (refer to the Operating Instructions, section ”Direct
selection of info pages”).
The central apartment unit transmits the switching group commands
to the switching group actuators – via RF and the wire-bound bus.
The output signal can be forwarded to the following types of devices:
Switching group function Supported types of actuators / suppliers
Switch, Dim
Switch and dim actuators:
- Siemens: GAMMA wave
- Hager: tebis Funk
- Any brand: S-Mode KNX TP1
*
Blind
Blind actuators:
- Siemens: GAMMA wave
- Hager: tebis Funk
- Any brand: S-Mode KNX TP1 *
Scene
Scene-compatible switch and dim
actuators:
- Siemens: GAMMA wave
- Hager: tebis Funk
- Any brand: S-Mode KNX TP1 *
* The connection of the relevant S-Mode objects of the central apartment
unit to the relevant S-Mode devices on KNX TP1 is made with a
commissioning tool (ETS)