Siemens SITRANS FUH1010PVX, Руководство по эксплуатации, Страница: 60 / 226

1-32
1010BXFM-3 Section 1
Controlotron Site [1]
Create-Name-Recall-Enable & Delete Site
Channel Setup
Pipe Data
Application Data
Pick/Install Xdcr
Operation Adjust
DataSpan/Set/Cal
Datalogger Setup
I/O Data Control
Diagnostic Data
z
Press the <Right Arrow> to move into the [Channel Setup] menu as shown below. Note
that the highlight is on the first menu cell: [Recall Site].
Controlotron Site [1]
Recall Site No Sites
Channel Enable No
Create/Name Site
Site Security
Off
Delete Site No Sites
Save/Rename Site
Channel Setup
z
Use the <Down Arrow> to move the highlight to [Create/Name Site]. Create a site named:
SITE1 (as detailed in paragraph 1.16.1).
1.17.2 HOW TO ENTER PIPE DATA
After creating the site, the next step is to enter the Pipe Data. The Pipe Data menu allows you
to either enter the pipe data manually or select a preset pipe configuration from an option
list. This section explains how to enter the data manually. The two mandatory entries to be
entered in this menu are the pipe’s Outer Diameter (OD) and its Wall Thickness. Here we will
insert a pipe outer diameter of 9.00" and a pipe wall thickness of 0.29" as an example.
z
Press the <Left Arrow> to leave [Channel Setup]. Press the <Down Arrow> and then the
<Right Arrow> to enter the [Pipe Data] menu.
z
Move the highlight to [Pipe OD <in>] and then press the <Right Arrow> and then the
<Right Arrow>. Note that an equal sign appears before the current parameter.