manualshive.com logo in svg

Siemens SITRANS FUH1010PVX, Руководство по эксплуатации, Страница: 154 / 226

Поделиться
Скачать
Siemens SITRANS FUH1010PVX Скачать руководство пользователя страница 154

      3-24

1010BXFM-3

Section 3

THERMAL COUPLANT

991T CLAMP-ON TEMPERATURE

SENSOR(MATCHED PAIR REQUIRED)

CUSTOMER’S PIPE

1012EC SERIES CABLE

992EMTN MOUNTING

ASSEMBLY

3.4

TEMPERATURE SENSORS (optional)

In order to accurately measure the liquid temperature, the System 1010BX meter can operate

with a Resistive Temperature Device (RTD) sensor. These sensors are available in clamp-on

style Model 991T, or in insert (Thermowell) style Model 991TW. Both styles incorporate 1000

ohm platinum RTD’s for high precision.

WARNING: Turn meter power OFF before connecting cables to the Temperature Sen-

sor input.

3.4.1 991T CLAMP-ON TEMPERATURE SENSOR

Clamp-on style sensors are mounted on the surface of the monitored pipe using 992EMT

series mounting assemblies. Apply a generous quantity of the thermal couplant provided

to the tip of the sensor and attach it securely to the cleaned pipe surface with the proper

mounting assembly. Temperature measurement anomalies resulting from variations in ambi-

ent temperature conditions can be minimized by insulating the pipe and sensor after clamp-

on installation is complete.

3.4.2 991TW THERMOWELL TEMPERATURE SENSOR

The 991TW insert sensors are designed to be used in pipes equipped with Thermowells. These

are spring-loaded 1/4-inch diameter sensors with 1/2-inch NPT integral connection heads,

available in several lengths to accommodate a range of pipe sizes. Thermowells for new instal-

lations are available from Alloy Engineering Company in Bridgeport, Connecticut.

Both types of temperature sensors are connected to the energy flowmeter via 1012EC series

cables. These four wire cables, associated drive and sensing circuits assure that measurement

accuracy at the RTD is independent of cable length.

the transducers with the cable connectors facing away from each other. Once the trans-

ducer is in place, Secure it with its clamping screw. Do not overtighten.

NOTE: Some transducers require a right-angle adapter. This adapter should be in-

stalled before placing the transducer in the tracks.

10. Connect the transducer cable, ensuring that you have observed the Upstream/Downstream

orientation in respect to the cable and the input jack on the computer. If this is a dual-

channel unit, make sure you are connecting the cables to the correct channel input jacks.

Содержание SITRANS FUH1010PVX



































































































































































































































Отзывы:

Нет отзывов