manualshive.com logo in svg

Siemens SIRIUS, Системное руководство, Страница: 39 / 425

Поделиться
Скачать
Siemens SIRIUS Скачать руководство пользователя страница 39

System overview

SIRIUS System Manual

GWA 4NEB 430 0999-02b

1-23

PROFIBUS-DP

PROFIBUS-DP (DP being a German abbreviation for distributed I/O) is used 
for switching devices with higher communication requirements (e.g. the 
transmission of analog actual values with extremely fast response times). It 
is also used to link individual AS-Interface segments. 

1.6.2 Parameterization of PROFIBUS-DP and bus-capable low-voltage switching devices

Before commissioning, PROFIBUS-DP must be configured, and the individ-
ual bus nodes must be parameterized. There are user-friendly tools available 
to the user for configuration and parameter assignment.

Parameter assignment 
tools

• For SIMATIC S7 masters, all the functions are integrated in the STEP 7 

programming language.

• For SIMATIC S5 masters and various non-Siemens masters, the COM 

PROFIBUS parameter assignment software is required.

• Manufacturers of non-Siemens masters offer other configuration and 

parameter assignment programs. 

Applications

The above program packages make it easy to carry out the following for 
PROFIBUS-DP and its nodes:
• Configuration
• Parameter assignment
• Documentation
• Commissioning
• Testing
• Diagnostics

For additional information on communication-capable low-voltage switching 
devices, as well as system components and accessories, see the following 
catalogs:
• ST 70 "S7, M7 and C7 Programmable Logic Controllers"
• IK PI "Industrial Communication and Field Devices"

1.6.3 Actuator-sensor interface (AS-Interface)

The actuator-sensor interface (AS-Interface) is a modular networking system 
for sensors and actuators in the lowest field range.
It makes no difference to the program in the programmable controller 
whether parallel wiring with input/output modules or AS-Interface is used. It 
is therefore possible for existing systems to change to AS-Interface because 
you can continue to use the same programs. The entire system can be oper-
ated without additional software. It is not necessary to be familiar with the 
internal workings of AS-Interface.

Содержание SIRIUS










































































































































































































































































































































































































































Отзывы:

Нет отзывов