manualshive.com logo in svg

Siemens SIRIUS, Системное руководство, Страница: 165 / 425

Поделиться
Скачать
Siemens SIRIUS Скачать руководство пользователя страница 165

3RT1/3RH1 contactors

SIRIUS System Manual

GWA 4NEB 430 0999-02b

3-57

3.4.1.1

 Terminal markings of the contactors (frame sizes S00 to S3) 

In contactors of frame size S00 with an integrated auxiliary contact, the ter-
minal marking complies with EN 50 012. This also applies to contactors of 
frame sizes S0 to S3 with an attached auxiliary switch block (2 NO + 2 NC 
contacts) that are available as complete systems.

Expanding the contac-
tors of frame size S00

All the contactors of frame size S00 (3 and 4-pole) can be expanded with 
auxiliary switch blocks with the identification numbers 40 to 02 in acc. with 
EN 50 005 as follows:
• Frame size S00 with an integrated auxiliary contact (identification number 

10E or 01) for contactors with 3 or 5 auxiliary contacts

• Frame size S00 with 4 main contacts for contactors with 2 or 4 auxiliary 

contacts

Note

The identification numbers on the auxiliary switch blocks only apply to the 
attached auxiliary switches.

Expanding the contac-
tors with 1 integrated 
NO contact, S00 
(3RT101.-...01)

Contactors with one NO contact as an auxiliary contact with screw-type or 
Cage Clamp terminals, identification number 10E, can be expanded with 
auxiliary switch blocks with terminal markings in acc. with DIN EN 50 012 
for contactors with 2, 4, and 5 auxiliary contacts. The terminal markings of 
the complete contactors comply with EN 50 012. The identification numbers 
11E, 22E, 23E, and 32E on the auxiliary switch blocks apply to the complete 
contactors.

Important

Auxiliary switch blocks in acc. with EN 50 012 can only be combined with 
contactors of frame size S00 that have 1 NO contact in the basic unit 
because they are coded. These auxiliary switch blocks cannot be combined 
with contactors that have an NC contact in the basic unit (identification num-
ber 01).

Содержание SIRIUS










































































































































































































































































































































































































































Отзывы:

Нет отзывов