manualshive.com logo in svg

Siemens SIRIUS, Системное руководство, Страница: 346 / 425

Поделиться
Скачать
Siemens SIRIUS Скачать руководство пользователя страница 346

3RP10, 3RP15 solid-state time relays

SIRIUS System Manual

7-2

 

GWA 4NEB 430 0999-02b

7.1 Specifications/regulations/approvals

Standards

The time relays comply with the  following standards:
• IEC 61812-1/DIN VDE 0435 Part 2021 on electrical relays and time relays
• IEC 61000 on electromagnetic compatibility
• IEC 60947-5-1; DIN VDE 0660 Part 200 on low-voltage switchgear
• IEC 60721-3-1/-3 on environmental conditions
• IEC 60529 on degree of protection

Electromagnetic com-
patibility

The time relays are tested in acc. with EN 50 081-1 (emission) and 
EN 50 082-2 (immunity) and are thus noise-free and surge-proof.

Switching capacity

The switching capacity complies with IEC 60947-5-1
• In the case of utilization category AC-15 and 230 VAC: 3 A
• In the case of utilization category DC-13 and 24 VDC: 1 A
• In the case of utilization category DC-13 and 48 VDC: 0.45 A
• In the case of utilization category DC-13 and 60 VDC: 0.35 A
• In the case of utilization category DC-13 and 110 VDC: 0.2 A
• In the case of utilization category DC-13 and 230 VDC: 0.1 A

UL/CSA/marine 
approval

The SIMIREL time relays are approved by UL and CSA for use worldwide 
and tested by the GL, LRS, DM marine authorities.

Approvals/
test reports

Confirmation of approvals, test certificates, and the declaration of confor-
mity can be obtained on the Internet/intranet.

Содержание SIRIUS










































































































































































































































































































































































































































Отзывы:

Нет отзывов