manualshive.com logo in svg

Siemens SIRIUS, Системное руководство, Страница: 172 / 425

Поделиться
Скачать
Siemens SIRIUS Скачать руководство пользователя страница 172

3RT1/3RH1 contactors

SIRIUS System Manual

3-64

 

GWA 4NEB 430 0999-02b

3  3RT1/3RH1 contactors

3.4.2 Time-delay auxiliary switches

Variants

The following variants of the time-delay auxiliary switch are available:
• On-delay
• Off-delay without auxiliary supply
• Star-delta function

On-delay and off-delay 
functions

The time-delay auxiliary switch in the on-delay or off-delay variants has the 
following features:
• It facilitates time-delayed functions up to 100 s
• 3 single time areas
• Contains a relay with 1 NO contact and 1 NC contact that switches the 

on-delay or off-delay depending on the version.

Star-delta function

The time-delay auxiliary switch with star-delta function has the following fea-
tures:
• Equipped with a delayed and an instantaneous NO contact between 

which there is an idle time of 50 ms.

• The delay time of the NO contact can be set at between 1.5 s to 

30 seconds.

• The contactor on which the time-delay auxiliary switch block is mounted 

functions instantaneously.

Conductor cross-sec-
tions

The permissible conductor cross-sections correspond to the auxiliary con-
ductor terminals of the corresponding frame size.

3.4.2.1  Frame size S00 (3RT1916-2E, -2F, -2G)

Description

The time-delay auxiliary switch of frame size S00 has the following features:
• The power supply is provided using plug-in contacts directly via the coil 

connections of the contactors, parallel to A1/A2.

• The time function is activated when the contactor that has the auxiliary 

switch block mounted on it is switched on.

• The off-delay version functions without an auxiliary supply.
• The minimum on-time is 200 ms.
• To dampen switching overvoltages of the contactor coil, a varistor is inte-

grated in the time-delay auxiliary switch of frame size S00.

Information on mount-
ing

Note about the off-delay without auxiliary supply function:

The position of the output contacts is not defined at shipment (bistable 
relay). Apply the control supply voltage once, and then switch it off again to 
set up the initial state of the contacts.

Содержание SIRIUS










































































































































































































































































































































































































































Отзывы:

Нет отзывов