Siemens SIRIUS 3RW50, Руководство пользователя

Страница: 147 / 238

Functions
7.12 3RW5 HMI High Feature
SIRIUS 3RW50 soft starter
Manual, 09/2019, A5E35628455002A/RS-AA/001
147
Further display options of the measured values
● With SIRIUS Soft Starter ES (TIA Portal) via the local interface on the
3RW5 HMI High Feature
● With a fieldbus via a 3RW5 communication module:
–
With SIRIUS Soft Starter ES (TIA Portal) Premium
(only via a 3RW5 PROFINET or PROFIBUS communication module)
– Configuration software of the control system (e.g. STEP 7 with corresponding HSP)
– User program
7.12.1.2 Graphic display of measured values on the 3RW5 HMI High Feature
Requirements
● 3RW5 HMI High Feature
Operating principle
The 3RW50 soft starter supports the graphic display of the measured values
"Phase currents (%)" and "Phase currents (rms)". These measured values can be presented
as bar or line charts on the display of the 3RW5 HMI High Feature.
The following measured values can be displayed in the charts:
●
Phase current IL1 (%) and (rms)
● Phase current IL2 (%) and (rms)
● Phase current IL3 (%) and (rms)
● Phase current average (%) and (rms)
Procedure for displaying bar charts
1. Select the menu item "Monitoring > Measured values > Phase currents (%) / Phase
currents (rms) > Show bar chart".
Depending on the menu item selected, the current values of the 3 phase currents (%) or
phase currents (rms) and the average value are displayed graphically in a bar chart.
2. Use the left and right navigations keys of the 3RW5 HMI High Feature to switch the view
between Phase currents (%) and Phase currents (rms).
3. Press the "ESC" key to exit the bar chart view.