Siemens SIRIUS 3RH Series Скачать руководство пользователя страница 416

Страница: 416 / 786

SIRIUS 3RV2 motor starter protectors

4.9 Accessories

SIRIUS Innovations

416

System Manual, 01/2011, A8E56203870002-03

4.9.5

Auxiliary release

4.9.5.1

Description

Auxiliary release

The releases, which are not size-specific, are available in three versions:
●

Undervoltage release

●

Undervoltage release with leading auxiliary contacts (2 NO contacts)

●

Shunt release

The releases are mounted on the right-hand side of the motor starter protector and have a

width of 18 mm. They are available for all commonly used voltages all over the world. They

can be installed inside molded-plastic enclosures.

Note



One auxiliary release can be mounted on each motor starter protector.



No accessories can be mounted on the right-hand side of 3RV21 motor starter protectors

with overload relay function.

Shunt release

For remote-controlled tripping of the motor starter protector
●

Via PLC: The release's coil should only be energized for a brief period.

Undervoltage release

The undervoltage release trips the motor starter protector in the event of voltage interruption

(e.g. if the power supply fails) and prevents the motor from being unintentionally restarted

when the voltage is restored. The motor starter protector then has to be reclosed by hand.

Particularly suitable for EMERGENCY OFF disconnection via corresponding EMERGENCY

OFF pushbutton according to IEC 60204-1 (VDE 0113)

Содержание SIRIUS 3RH Series



















































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание SIRIUS 3RH Series

Отзывы:

Бренды по названию

Популярные бренды

Siemens SIRIUS 3RH Series, Системное руководство

Результаты поиска

Содержание SIRIUS 3RH Series

Отзывы:

Бренды по названию

Популярные бренды