Siemens SINUMERIK 802D sl Скачать руководство пользователя страница 73

Страница: 73 / 462

Turning, Milling, Nibbling
Function Manual, 11/2012, 6FC5397-1CP10-5BA0

Travel to fixed stop (F1)

Note
This function is not available with version T/M value.

5.1

Brief description

Application range

The travel to fixed stop (FXS = Fixed Stop) function can be used to establish defined forces

for clamping workpieces, such as those required for sleeves and grippers. The function can

also be used for the approach of mechanical reference points. With sufficiently reduced

torque, it is also possible to perform simple measurement operations without connecting a

probe.
Travel to fixed stop can be performed simultaneously for several axes and parallel to the

movement of other axes.
The fixed stop can be approached on a path (straight line, circle).

Availability

The "travel to fixed stop" function is available when MD37000 FIXED_STOP_MODE (travel

to fixed stop mode) = 1 is set. The function can then be started from the NC program with

command "FXS[x]=1".

5.2

Functionality

Programming

Travel to fixed stop is selected with command
●

FXS[machine axis identifier] = 1 selected.

●

FXS[machine axis identifier] = 0 de-selected.

The clamping torque is set with the command:FXST[Machine axis identifier] = <torque>. It is

given as a percentage of the static torque of the drive or a percentage of the nominal motor

torque for MSD.

Содержание SINUMERIK 802D sl















































































































































































































































































































































































































































































Результаты поиска

Содержание SINUMERIK 802D sl

Отзывы:

Siemens SINUMERIK 802D sl, Руководство по эксплуатации функций, Страница: 73 / 462

Результаты поиска

Содержание SINUMERIK 802D sl

Отзывы: