Siemens SINUMERIK 802D sl Скачать руководство пользователя страница 441

Страница: 441 / 462

Turning, Milling, Nibbling
Function Manual, 11/2012, 6FC5397-1CP10-5BA0

441

Glossary

Absolute dimensions

A destination for an axis movement is defined by a dimension that refers to the origin of the

currently active coordinate system. See → Incremental dimension.

Acceleration with jerk limitation

In order to optimize the acceleration response of the machine whilst simultaneously

protecting the mechanical components, it is possible to switch over in the machining program

between abrupt acceleration and continuous (jerk-free) acceleration.

Address

An address is the identifier for a certain operand or operand range, e.g. input, output, etc.

Alarms

All → messages and alarms are displayed on the operator panel in plain text with date and

time and the corresponding symbol for the cancel criterion. Alarms and messages are

displayed separately.
1.

Alarms and messages in the part program:
Alarms and messages can be displayed in plain text directly from the part program.

Alarms and messages from the PLC
Alarms and messages for the machine can be displayed in plain text from the PLC

program. No additional function block packages are required for this purpose.

Содержание SINUMERIK 802D sl















































































































































































































































































































































































































































































Результаты поиска

Содержание SINUMERIK 802D sl

Отзывы:

Siemens SINUMERIK 802D sl, Руководство по эксплуатации функций, Страница: 441 / 462

Результаты поиска

Содержание SINUMERIK 802D sl

Отзывы: