Siemens SINUMERIK 802D sl Скачать руководство пользователя страница 369

Страница: 369 / 462

Turning, Milling, Nibbling
Function Manual, 11/2012, 6FC5397-1CP10-5BA0

369

Indexing Axes (T1)

21.1

Brief Description

Note
This function is not available with version T/M value.

Indexing axes in machine tools

In certain applications, the axis is only required to approach specific grid points (e.g. location

numbers). It is necessary to approach the defined grid points, the indexing positions, both in

AUTOMATIC and set-up mode.
The relevant axes are called "indexing axes". The positions defined on the indexing axes are

known as "coded positions" or "indexing positions".

Applications

Indexing axes are used predominantly in connection with specific types of tool magazines

such as tool turrets, tool chain magazines or tool cartridge magazines. The coded positions

refer to the individual locations of the tools in the magazines. During a tool change, the

magazine is positioned at the location containing the tool to be loaded.

Display indexing

The following data can be queried via system variables:
●

The number of the current indexing position:
–

When the "exact stop fine" window of the indexing position is reached

–

When half the distance to the next indexing position is crossed

●

The programmed indexing position

Содержание SINUMERIK 802D sl















































































































































































































































































































































































































































































Результаты поиска

Содержание SINUMERIK 802D sl

Отзывы:

Siemens SINUMERIK 802D sl, Руководство по эксплуатации функций, Страница: 369 / 462

Результаты поиска

Содержание SINUMERIK 802D sl

Отзывы: