Siemens SINUMERIK 802D sl Скачать руководство пользователя страница 303

Страница: 303 / 462

Turning, Milling, Nibbling
Function Manual, 11/2012, 6FC5397-1CP10-5BA0

303

Transverse Axes (P1)

16.1

Transverse axis definition

Geometry axis as transverse axis

The geometry axis X is defined as a transverse axis. The transverse axis is important for

lathe functions.

16.2

Diameter programming

Activation and deactivation

The diameter or radius can be programmed for transverse axes.
Program commands "DIAMON" and "DIAMOF" can be used to activate and deactivate the

diameter programming of a traverse axis. DIAMON and DIAMOF belong to G group 29 and

are modal.

JOG mode

If DIAMON is active, then the increments entered for machine functions INC (incremental

dimension) and handwheel traverse in JOG are interpreted and traversed as diameter values

for the associated transverse axis (traversal in WCS with this axis).

Setpoint / actual value display

If the "DIAMON" function is activated for a transverse axis, then the position, distancetogo

and REPOS offset are displayed in the diameter when the workpiece coordinate system

(WCS) is selected.
The display is always in the radius in the machine coordinate system (MCS).

Offsets

All offsets (e.g. tool offsets, programmable and settable zero offsets) are always entered,

programmed and displayed as radius values (even if they are active in the transverse axis

and command DIAMON is active).

Working area limitation, software limit switches, feed values

This data is always entered, programmed and displayed as radius values.

Содержание SINUMERIK 802D sl















































































































































































































































































































































































































































































Результаты поиска

Содержание SINUMERIK 802D sl

Отзывы:

Siemens SINUMERIK 802D sl, Руководство по эксплуатации функций, Страница: 303 / 462

Результаты поиска

Содержание SINUMERIK 802D sl

Отзывы: