Siemens SINUMERIK 802D sl Скачать руководство пользователя страница 424

Страница: 424 / 462

Tool: Compensation and Monitoring (W1)

25.2 Tool

Turning, Milling, Nibbling

424

Function Manual, 11/2012, 6FC5397-1CP10-5BA0

25.2

Tool

Select a tool

A tool is selected in the program with the T function. Whether the new tool is immediately

loaded with the T function or with M6 depends on the setting in MD22550

TOOL_CHANGE_MODE (new tool offset with M function).

Value range of T

The T function can assume integer values from T0 (no tool) to T32000 (tool with the number

32000).
The following is the maximum that can be stored simultaneously in the control system:
●

SINUMERIK 802D sl value: 32 tools

●

SINUMERIK 802D sl plus: 64 tools

●

SINUMERIK 802D sl pro: 128 tools.

25.3

Tool offset

Tool compensation through D function

A tool can have up to nine cutting edges. The nine tool cutting edges are assigned to the D

functions D1 to D9.
The following maximum values for tool compensation blocks can be stored simultaneously in

the control system:
●

SINUMERIK 802D sl value: 32 data fields (D numbers)

●

SINUMERIK 802D sl plus: 64 data fields (D numbers)

●

SINUMERIK 802D sl pro: 128 data fields (D numbers)

The tool cutting edge is programmed with D1 (edge 1) to D9 (edge 9). The tool cutting edge

always refers to the currently active tool. An active tool cutting edge (D1 to D9) without an

active tool (T0) is inactive. Tool cutting edge D0 deselects all tool offsets of the active tool.

Selection of the cutting edge when changing tool

When a new tool (new T number) has been programmed and the old one replaced, the

following options are available for selecting the cutting edge:
●

The cutting edge number is programmed

●

The cutting edge number is not programmed D1 is active automatically.

Содержание SINUMERIK 802D sl















































































































































































































































































































































































































































































Результаты поиска

Содержание SINUMERIK 802D sl

Отзывы:

Siemens SINUMERIK 802D sl, Руководство по эксплуатации функций, Страница: 424 / 462

Результаты поиска

Содержание SINUMERIK 802D sl

Отзывы: