manualshive.com logo in svg

Siemens SINUMERIK 802D sl, Руководство по эксплуатации функций, Страница: 148 / 462

Поделиться
Скачать
Siemens SINUMERIK 802D sl Скачать руководство пользователя страница 148

Manual and Handwheel Travel (H1) 

 

8.5 Fixed-point approach in JOG 

 

Turning, Milling, Nibbling 

148

 

Function Manual, 11/2012, 6FC5397-1CP10-5BA0 

8.5

 

Fixed-point approach in JOG 

8.5.1

 

Introduction 

Function    

The machine user can use the "Approach fixed point in JOG" function to approach axis 

positions defined using machine data by actuating the traversing keys of the Machine 

Control Panel or by using the handwheel. The traveling axis comes to a standstill 

automatically on reaching the defined fixed point. 

Applications 

Typical applications are, for example: 
●

 

Approaching a basic position before starting an NC program. 

●

 

Travel towards tool change points, loading points and pallet change points. 

Requirements 

●

 

The "Approaching fixed point in JOG" can be activated only in the JOG mode. 
The function cannot be enabled in the JOG-REPOS and JOG-REF sub-modes and in 

JOG in the AUTOMATIC mode. 

●

 

The axis to be traversed must be referenced. 

●

 

A kinematic transformation may not be active. 

●

 

The axis to be traversed must not be a synchronized axis of an active coupling. 

●

 

No ASUPs are executed. 

Approaching a fixed point with G75   

The process for approaching defined fixed points can be activated from the part program too 

using the 

G75

 command. 

For more information on approaching fixed points with 

G75

, please refer to: 

References: 

Programming and Operating Manuals; Section: "Programming" -> "Axis movements" > 

"Fixed-point approach (G75)" 

Содержание SINUMERIK 802D sl















































































































































































































































































































































































































































































Отзывы:

Нет отзывов