manualshive.com logo in svg

Siemens SINUMERIK 802D sl, Руководство по эксплуатации функций, Страница: 53 / 462

Поделиться
Скачать
Siemens SINUMERIK 802D sl Скачать руководство пользователя страница 53

 

Axis Monitoring (A3) 

 

2.4 Monitoring of static limits 

Turning, Milling, Nibbling 
Function Manual, 11/2012, 6FC5397-1CP10-5BA0 

53

 

2.4.3

 

Working area limitation 

Function 

Working area limits describe the area in which machining is possible. They enable the user 

to limit the traversing range of the axes in addition to the limit switches. 
Reference: 
/BP_/ Operation and Programming 
A check is made to see whether the tool tip P is within the protected working area. The value 

entered for the working area limit is the last permissible position of the axis. 
MD21020 WORKAREA_WITH_TOOL_RADIUS (allowance for tool radius with working area 

limits) can be set to determine whether the monitor is to take account of the tool radius. 
One pair of values (minus/plus) is possible for each axis to describe the protected working 

area. 

Define working area limits 

The working area limits can be defined or changed in two ways: 
●

 

Via the operator panel in the "Parameters" operating area using the following setting data: 
SD43430 WORKAREA_LIMIT_MINUS (Working area limitation minus) 
SD43420 WORKAREA_LIMIT_PLUS (Working area limitation plus) 
Changes during Automatic mode are only possible in the reset state and then take effect 

immediately. Changes during JOG mode are always possible, but only take effect with a 

new movement. 

●

 

In a program with G25/G26. Changes are immediately effective. 
A programmed motion has priority, it overwrites the value entered in the setting data and 

is retained after RESET and End of Program. 

Содержание SINUMERIK 802D sl















































































































































































































































































































































































































































































Отзывы:

Нет отзывов