manualshive.com logo in svg

Siemens SIMODRIVE 611-D, Руководство по установке

Поделиться
Скачать
Siemens SIMODRIVE 611-D Скачать руководство пользователя страница 876

11.92

12  Functional Descriptions

12.12.5  Influence of the modes on the path dimension function from the PLC

•

Software limit switch (SW-L):
The following effects occur:

a a a a a a a a

a a a a a a a a

a a a a a a a a

a a a a a a a a

SW-L

a a a a a a a

a a a a a a a

a a a a a a a

a a a a a a a

SW-L

a a a a a a a a

a a a a a a a a

a a a a a a a a

a a a a a a a a

SW-L

a a a a a a a a

a a a a a a a a

a a a a a a a a

a a a a a a a a

SW-L

The path dimension is traversed

The path dimension is not traversed 
and aborted

The path dimension is not traversed 
and aborted

The path dimension is traversed

1.

2.

3.

4.

•

Transformation
Requirement: Transformation is selected and active.

The following conditions apply:

1.

Fictitious axis as a path dimension axis
The path dimension axis is transformed into a real axis and traversed.

2.

Real axis as a path dimension axis
The real axis is not traversed.
The path dimension function is aborted and a negative acknowledgement is sent to the
PLC.

If the transformation is not selected and not active and the path dimension axis is a
fictitious axis, the path dimension function is aborted.
Delete distance to go has no effect.
In-process measurement is not possible.

•

Coupled motion
Requirement: Coupled motion is selected and active.

The following conditions apply:

1.

Leading axis as the path dimension axis:
The coupled-motion axes traverse with the leading axis.

2.

Coupled-motion axis as the path dimension axis:
Coupled-motion axes are not traversed.
Path dimension is aborted and a negative acknowledgement is sent to the PLC.

© Siemens AG  1992  All Rights Reserved      6FC5197- AA50

12–101

SINUMERIK 840C (IA)

Содержание SIMODRIVE 611-D



































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды