Mounting and connecting the Extension Unit
3.5 Installing Standard operator controls
Extension Units KPxx
42
Operating Instructions, 05/2019, A5E43600360-AC
3.
Insert the operator control at the mounting position from the front of the Extension Unit,
the nipple for anti-twist protection must point up.
4.
Fasten the operator control from the inside with the supplied nut, torque = 1.2 Nm.
5.
Insert the connection module of the operator control into the Extension Unit so that the
plug-in connector is at the top. Fasten the connection module onto the enclosure of the
Extension Unit at the marked locations, torque 0.8 Nm.
